The more contracts and traffic you add to your system, the more you need to keep track of and manage. Automation allows the player to let sections of their map run hands-free, reducing their workload.
Auto Signals[edit | edit source]
The first piece of automation the player unlocks, auto signals save the player a few clicks by automatically routing all switches between it and its destination. These are perfect for more complex junctions where using manual signals is more of a pain than it is a passtime.
When you click on an auto signal, it will show you all the places it can route to in orange. Click on the spot you want the train to end up to, and the signal will route to there. The GIF on the right shows this in action.
You can right-click on an auto signal to remove its route.
Routing Queue[edit | edit source]
Once unlocked via the research tree, the Automatic Routing Queue allows you to temporarily store routes that the signal will find a path to once the route is clear. If any signal's route - including its own - is in the way, the signal will queue the route and wait.
To delete queued routes, find them in the menu in the lower right corner of the screen, then hit the garbage bin icon to the right. The routes queued are listed in order, with the topmost route being the first route to be chosen and the bottom being the last. If you are uncertain which queued route to remove, hover over the track name on the left. The game will highlight what track it is on the map, allowing you to figure out which route to delete.
If you want an auto signal to route to the same spot, simply click on the orange line, as always. If you want it to always route to the same spot, click on the infinity sign in the little menu on the lower right-hand portion of the screen.
You can clear all queued routes with the icon at the top of the list of queued routes that looks like a smaller trash can and a piece of paper.
Auto-Accept[edit | edit source]
Do you not want to manually let trains in? Auto-accept is here to save the day! When selected, trains will enter the map without your input.
Be careful, though! If a track is occupied either by another train or a signal's route, the train will enter on another station track! This can easily penalize you if you're not careful, and if you're not prepared, a train could get stuck on a track intended for trains leaving the map rather than entering it. Don't let your stations get too clogged, and be cautious with your timetables!
Once unlocked, Auto-Accept is free to add to any number of stations.
Sensors[edit | edit source]
Sensors detect when a train runs past them and automatically set a route of another signal to a specific track, depending on the train's current destination. If a train's destination is not on the sensor's list of routes, the sensor will not activate, unless a track has been selected in the "others to" setting.
Multiple sensors can be hooked up to one sensor! Each sensor can only pair up with one signal, however.
Routing Sensor[edit | edit source]
Routing Sensors route a train depending on their station. Once a signal has been selected, you can select routes that signal is able to route to. To add a new route, click on the plus sign (+) on the right of the sensor menu, select the destination station by clicking on its name, then select the track for the train to route to by clicking on the corresponding orange line.
If a route is altered in some way, e.g. a switch is added or a signal is put in the way the route, the sensor will not properly route to its destination. To fix this, either delete the route and re-make it from scratch, or click on the rightmost cursor icon on the corresponding route in the sensor menu, then select the new track.
If you alter a junction, check your sensors! Make sure they're routing correctly! Even the most experienced players can struggle with this!
Platform Sensor[edit | edit source]
When approaching a station, Routing Sensors will only route to one track, which can be troublesome if your train needs to go to a different track. The Platform Sensor fixes this, but is much more limited than the routing sensor. The Platform Sensor will only route to one station, but will route to every track that it can on said station. You will still need to make sure there's tracks connecting every platform to the signal the Platform Sensor is paired with, but the sensor will handle the rest.
The Platform Sensor will list all tracks it can route to at the bottom of its menu.
Departure Sensor[edit | edit source]
Departure Sensors are the only sensor that you can't freely build. They must be built on station platforms, and must be bought in the station's menu, as shown on the right.
Departure sensors can access signals on both ends of the station, but can only access auto signals. If one end of the station doesn't have an auto signal while the other does, only the side with the auto signal will be usable.
The most unique part of the sensor is it has the ability to reverse trains. If a departing train's route requires the train to reverse, it will automatically do so when it starts to leave the station.
Trains passing through stations will not trigger departure sensors. Put a routing sensor before the station and hook it up to the signal on the other end.